close audio
You Are Here: Front Page » Air Compressor Parts: Belts, Filters, Regulators & More » Coleman Powermate Air Compressor Parts | Master Tool Repair » Coleman, Sanborn Pumps & Parts » MSL10Conversion Right Supply New Pump Conversion MASTERTOOLREPAIR.COM

New Pump Conversion MSL10Conversion Right Supply - $326.54

Coleman, Sanborn Pumps & Parts

Product Details
MSL10Conversion Right Supply - New Pump Conversion

Found under the following brands: Master Tool Repair
Part Number: MSL10Conversion Right Supply

Description:

Bolts up with minor modifications. For most pumps that have 2 tubes coming out of head (Head and valve plate can be rotated as needed). Note: Order this Pump for units with two lines coming out of head if facing the front of the Pump, with Flywheel facing away from you. Pump includes flywheel and air filter (lines are not included). MAY REQUIRE NEW BOLT HOLES TO BE DRILLED IN THE BASE. See Extra Details. Click here for full schematic of pump

The pump compresses air and sends the pressurized air to an air receiver/tank for use. The two types of pumps are reciprocating pumps (by far the most common in construction and residential use) and rotary screw pumps. Many pumps are cast iron but can also be aluminum. In air compressors, there exist oil-free and oil-bath pumps. Oil-free pumps use bearings and a Teflon-coated compression ring and reed valves to produce compression, while oil-bath pumps use standard conrods, pistons and rings with an oil-filled crankcase. Oil-bath pumps are generally longer lasting, quieter and product more CFM/PSI; oil-free pumps don’t require much maintenance and are convenient and portable. A clean air filter and good, proper oil (if applicable) will keep your pump running for years to come.

Select quantity:

 

This item fits the following models:

Air Compressor Pump Parts - 84A, 104A, 112A, 143, 400A, 500A

Extra Details

This pump has a 1/2" NPT hole for the air filter assby. and a 3/8" hole for the supply line.

Torque specs:

  • Cylinder head  177 in lbs.
  • Cylinder 177 in lbs.
  • Flywheel 177 in lbs.
  • Flange 71 in lbs.
  • Valve Retainer Screws 20 in lbs. 


Your question about this product has been received!
loading
loading