close audio
You Are Here: Front Page » Air Compressor Parts | Huge Selection | Great Prices » Air Compressor Pumps | Huge Selection | Great Prices » Air Compressor Pumps Single Stage 125 PSI » 421-1102 KU Pump MASTERTOOLREPAIR.COM

Jenny KU Pump 421-1102 - $480.48

Air Compressor Pumps Single Stage 125 PSI

Product Details
Jenny
Brand: Jenny
Part Number: 421-1102

Capacity: 4 - 8.6 CFM @ 125 PSI

421-1102 - KU Pump
Description:

See Specs for CFM output. Usually for constant spinning applications. The Jenny KU pump has head unloaders but can be used for both start/stop and constant run applications. Made in USA. Has single-groove Flywheel. Note:If your serial number starts with "G" then order new style KU pump part # 421-1112

The pump compresses air and sends the pressurized air to an air receiver/tank for use. The two types of pumps are reciprocating pumps (by far the most common in construction and residential use) and rotary screw pumps. Many pumps are cast iron but can also be aluminum. In air compressors, there exist oil-free and oil-bath pumps. Oil-free pumps use bearings and a Teflon-coated compression ring and reed valves to produce compression, while oil-bath pumps use standard conrods, pistons and rings with an oil-filled crankcase. Oil-bath pumps are generally longer lasting, quieter and product more CFM/PSI; oil-free pumps don’t require much maintenance and are convenient and portable. A clean air filter and good, proper oil (if applicable) will keep your pump running for years to come.

Product Specifications

CFM output is dependent upon the horsepower of the motor/engine:

  • 3/4 HP = 2.7 CFM @ 100 PSI (Delivered CFM)
  • 1 HP = 4 CFM @ 125 PSI (Delivered)
  • 1 1/2 HP = 6.2 CFM @ 125 PSI (Delivered)
  • 2 HP - 8 CFM @ 125 PSI (Delivered)
  • 5.5 HP (Gas) = 8.6 CFM @ 125 PSI (Delivered)


Your question about this product has been received!
loading
loading