close audio
You Are Here: Front Page » Air Nailer Parts | Huge Selection | » Bostitch Nailer Parts | Huge Selection » Bostitch Nailer Parts By Model Number | » 104059 Head Valve MASTERTOOLREPAIR.COM

Bostitch Head Valve 104059 $36.09

Bostitch Nailer Parts By Model Number

Product Details
Brand: Bostitch
Part Number: 104059

Description: This part under the o-rings can actually wear smaller due to sand or dirt in your nailer. Also check your head cap to make sure grooves are not worn into the aluminum.

The head valve is one of the major components in a nail gun. When the trigger is depressed there is greater pressure below the head valve plunger than above it. The plunger rises up, and the compressed air makes its way to the piston head. When air pressure is greater above the head valve plunger than it is below the piston, air is released and air travels through the valve, forcing the piston/driver downwards to drive the nail/staple. There are o-rings inside and outside of the head valve. If the head valve leaks, try replacing the o-rings first, then the valve itself, as it will wear down over time.

Select quantity:


This item fits the following models:

Pneumatic Framing Nailer Parts - N80SB
Pneumatic Framing Nailer Parts - N80CB
Pneumatic Framing Nailer Parts - N95RHN
Pneumatic Framing Nailer Parts - N80CB-1

Your question about this product has been received!