Used on units up to 4.5 HP motors. Pump includes felt filter. Flywheel is not included. NOTE! If ordering a new 130 Pump, you can use the Head from your original pump, as it will retro-fit onto the new Pump. This is necessary for older pumps that have two outlets in the head; the new pump Head only has one outlet in the head.
The flywheel is the compressor pump’s pulley, which the belt attaches to and drives the crankshaft. Be sure the flywheel and motor/engine pulley is aligned, as a misaligned pulley and flywheel can damage the pump and motor/engine. Replace if cooling fins are missing. Most flywheels have a specific rotation (usually C.C.W. when looking directly at the flywheel) so be sure the flywheel is installed correctly when replacing it to efficiently cool the pump.
This item fits the following models:
6.0 CFM @ 90 PSI
3-Nailer Combo Kit w/ Accessories
3-Nailer Combo Kit
1/4" x 50 Ft Noodle Air Hose with Coupler and Plug