130 Pump (040-0221) and 165 Pump (040-0222)
[Individual Repair Parts]

Click to enlarge

Image
Specs
Extra Details

Product Details

Note: This schematic covers several different models. Please consult your owner's manual to verify part numbers or call our sales department for assistance. Click Here to view a parts breakdown

Click on Specs Tab above before ordering parts for this pump.

For a parts breakdown, click the picture below to enlarge.
(Scroll down for more info)

130 Pump (040-0221) and 165 Pump (040-0222)
Click to enlarge

Product Specifications

Min RPM 700
Max RPM 1200
Max pressure 125 psi
Max duty cycle 50%
Oil capacity 18 oz.
130 Pump 6.0 cfm @ 90psi (2 HP motor)
165 Pump 10.1 cfm @ 90spi (5 HP motor)
39 lbs.
Torque specs (see Schematic on "Description" tab)
For 2-4.5HP units, you have a 130 pump
For 5HP and greater they call it a 165 pump. The only difference is the crankshaft and connecting rods.
Make sure of your pump model before ordering these parts or a new pump.
New pump comes with felt style air filter. Old canister style not available with new pumps.
New style pump has 1/4" FPT & 1/8" FPT outlet ports in head. (Your old head may be 1/2" and will need an adapter or simply order a short block and use your old head and flywheel)
If replacing valve plate or purchasing short block, please order the felt style filter and screen as the new style valve plate will not hold any other filter setups.

Extra Details

Head bolt torque 220-200 in lbs.
Carrier bolt torque 170-230 in lbs.
Flywheel bolt torque 150-250 in lbs.
Bottom oil pan torque 30-50 in lbs.
Connecting rod torque 160-200 in lbs.

Need us to add your model or have a question....

*Please select the quantity for each item you wish to order and click the 'Buy Now' button below. (You can sort list by Part number, Item or Price)

Displaying 1 to 46 (of 46 products)

Result Pages: 1

Item+	Description	Part Number	Price	Qty
(0000) 130 Pump	NOTE: This item is no longer available. Please order item # 040-0429 (130 pump, no flywheel).	040-0221		(X)
(0000) 130 Pump (No Flywheel)	Used on 2 HP-4.5HP motors. Flywheel is not included. (remove from old pump and install on new pump)	040-0429	$325.48
(0000) 165 Pump (Coleman Sanborn)	NOTE: This item is no longer available. Please order item # 040-0430 (165 pump, no flywheel).	040-0222		(X)
(0000) 165 Pump (no flywheel)	Used on 5 HP-6.5HP motors. No flywheel. (remove from old pump and install on new pump)	040-0430	$322.62
(0002) Rings for piston	Includes rings for both pistons for the 130/165 pump.	054-0112	$34.05
(0003) Piston	Piston for 130 & 165 pump. Includes wrist pin, rings and two retainers.	048-0065	$45.13
(0004) Connecting Rod for 5 HP and up.	Connecting Rod for 5 HP and greater for 165 pump. Torque 160-200 in. lbs.	047-0092	$24.95
(0004) Connecting Rod up to 4.5HP	Connecting Rod up to 4.5HP for 130 pump. Torque 160-200 in. lbs.	047-0091	$25.73
(0005) Bearing	Bearing for front of crank. (Older pumps had obsolete bronze bushing, order short block below if damaged)	051-0043	$28.03
(0007) Bearing Carrier w/ bearing	Bearing carrier and bearing for flywheel end.	045-0053	$36.03
(0009) Crankshaft for 130 Pump (up to 4.5HP)	Replace this also if your crank is grooved or pitted. Make sure you have the correct pump. There is a 130 and 165 pump. They both look the same on the outside.	053-0041	$64.71
(0011) 12" flywheel	Measure your flywheel first to be sure.	044-0063	$52.07
(0011) Flywheel (was 044-0026)	10" Flywheel. Measure your flywheel first to be sure.	044-0027	$71.37
(0012) Oil Seal	Replace when removing crankshaft, bearings or if leaking.	046-0161	$9.12
(0013) Crankshaft for 165 pump (5 HP)	Replace this also if your crank is grooved or pitted. Make sure you have the correct pump. There is a 130 and 165 pump. They both look the same on the outside.	053-0043	$65.60
(0014) Teflon Seal	Teflon seal for front of crank.	051-0081	$14.93
(0014a) Bearing	Roller bearing. (Older pumps had obsolete bronze bushing, order short block below if damaged)	051-0013	$21.53
(0015) Crankcase	For 14 bolt pattern. Case and roller bearing only. Order pan and gaskets if needed.	049-0050-S	$171.30
(0015) Crankcase	For 8 bolt pattern. Obsolete, order 040-0309 or 0311 short block below.			(X)
(0016) Oil Pan Gasket	If replacing crank or rings, replace this gasket. (14 bolt style)	046-0263	$14.61
(0016) Oil Pan Gasket	If replacing crank or rings, replace this gasket. (8 bolt style)	046-0150	$21.69
(0017) Oil Pan (14 hole)	Replace if cracked. Order gasket set also.	077-0148	$20.76
(0017) Oil Pan (8 hole)	This one is obsolete.	077-0065		(X)
(0019 & 36) Ball & Spring Valve	Ball and spring for older style 130/165 pumps. Fits in the block under the valve plate assembly.	130/165Ball/Spring	$10.85
(0020) Dipstick		056-0019	$12.88
(0021) Valve Plate	Obsolete item. Please order replacement item # 043-0142.	043-0125		(X)
(0021) Valve Plate Kit	Poor performance? This is probably the problem.(Requires use of felt style filter below) Old part may have 043-0125 on it. Kit comes with upper and lower gaskets. Click here to view installation instructions	043-0142	$49.95
(0021a) Lower Valve Plate Gasket	Fits between valve plate and cylinder.	046-0152	$12.69
(0021b) Head Gasket	Top gasket under head.	046-0151	$20.60
(0022) Head kit	This kit includes: New head as well as compression adaptors for 3/8" or 1/2" supply tubes. (Order head gaskets if needed)	S042-0068	$48.75
(0022a) Adaptor	If your pump has an 'X' in front of the serial number and your supply tube measures 3/8" OD, then order this 1/4" NPT x 3/8" Compression adaptor.	68-6-4	$2.95
(0022a) Adaptor	If your pump has an 'X' in front of the serial number and your supply tube measures 1/2" OD, then order this 1/4" NPT x 1/2" Compression adaptor.	068-0063	$16.20
(0023)Filter Screen	Filter ScreenMetal screen for 130/165 Sanborn style pumps.	S118-0023	$12.52
(0024) Felt filter -4 pk.	Protect your pump from damage by keeping clean or replacing. 4 pack of felt filters for Sanborn 130/165 style pumps. Approximately 1 1/4" x 4 1/2".	019-0052-Q4	$19.95
(0024)Felt filter	Felt filter for Sanborn 130/165 style pumps. Approximately 1 1/4" x 4 1/2". Order 2 or 3 for spares.	019-0052	$3.92
(0025) Filter plate for dual filters	Metal plate fits original valve plate on your unit. (not for new valve plate style)	019-0096	$19.95
(0026) Filter element (ea)	Filter element only for twin, twist lock filter style. 3" W x 1.25" Ht. Element only for air filter assembly.	AFCE2	$10.98
(0026,0027) Filter Assby. (ea)	1/2" MPT filter assby. Twist lock style. Comes with element. (ea.) Note: Older models with twin, wing nut style (hollow elements) can upgrade assembly to newer twist lock assembly. Order 2 to replace both.	AFC2	$19.95
(0028) Filter element (ea)	For larger single assby. AFC3 filter style. Element only for air filter assembly.	AFCE3	$11.98
(0028,0029) Air Filter Assby.	Fits large single filter style. Order a new assembly. Twist lock style filter assby. with element. Has 1/2" MPT.	AFC3	$20.90
(0028c)Air filter	#8 hollow filter for older Sanborn pumps (old wing nut style)(ea.)Protect your pump from damage by keeping clean or replacing.	019-0053	$42.79
130 Short Block Pump	Does not include head and flywheel. Just transfer your old head and flywheel to this pump.	040-0309	$375.90
165 Short Block Pump	Does not include head and flywheel. Just transfer your old head and flywheel to this pump!	040-0311	$372.46
Gasket kit for 130/165 pumps	Includes 6,16,21a,21b gaskets for rebuild. Includes both style oil pan gaskets.	046-0159	$43.21
Overhaul kit (canister filter)	Overhaul kit for twin canister filter style pump. Includes, rings, gasket sets and new valve plate assembly. Note: Please order replacement kit 165-0083. New valve plate will require use of felt filter system versus old canister style filters.	165-0055		(X)
Overhaul kit (felt filter)	Overhaul kit for felt filter style pump. Includes 2,6,16,21,24.	165-0083	$90.17

Displaying 1 to 46 (of 46 products)

Result Pages: 1

130 Pump (040-0221) and 165 Pump (040-0222)[Individual Repair Parts]

130 Pump (040-0221) and 165 Pump (040-0222)
[Individual Repair Parts]