Repair Parts for the Chicago Pneumatic model RCP-1030G Portable Two-Stage Gas Air Compressor
Requirement: a 5HP motor with at least a 7/8" shaft for this pump.
18cfm @100psi 16cfm @175psi.
1/2" FPT outlet. Bolt pattern 6.75 in. front to back 7.5 in. side to side.
13.75 in. single belt flywheel.
1-1/4" FPT on aftercooler outlet.
Total ht. 16" Min RPM 700 Max RPM 1400
New pump has 1 groove smaller flywheel, but will work just fine. Simply run 1 belt and purchase a smaller belt.
Standard break-in procedure:
1. Open drain tap
2. Turn on compressor for about 10 to 15 min.
3. Let it cool for 15 to 20 min.
4. Close drain tap.
5. Run air compressor until unit turns off by itself.
6. Ready for use.
We have your Chicago Pneumatic RCP-1030G parts here. Whether you need a pressure switch, check valve or a whole new pump, we have your parts. Don't forget the rubber isolator pads for floor mounting. Chicago Pneumatic RCP-1030G parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Chicago Pneumatic RCP-1030G parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need. Make sure to keep spare parts on hand so that your down time will be minimal. Oil and air filters should be replaced every 3 to 4 months if used frequently, twice a year if not. Even if you're not using your compressor, drain your tank regularly to prevent rust.
B5900 Pump Torque specs:
Head Bolts: 260-370 IN/LBS
Intercooler Bolts: 165-240 IN/LBS
Cylinder Bolt: 260-370 IN/LBS
Bearing Cover Bolt: 80-100 IN/LBS
Oilpan Bolt: 80-115 IN/LBS
Conrod Bolt: 185-270 IN/LBS
Air Filter Assembly Bolt: 165-205 IN/LBS
Flywheel Bolt: 260-370 IN/LBS
Click on image below to choose your parts. (Scroll down for repair parts)
« prevTank Partsnext »
Click the part reference numbers in this schematic to choose your parts or scroll down to choose your parts from the parts list.