Head Gasket #08066F

Old Part Numbers: 104-1008

Head Gasket for air compressors. Also available in the KUVALVEKIT, Gasket Kit, or Rebuild Kit.

If the compressor pump doesn't seem to pressurize as quickly as it should or is leaking in between the head, valve plate, cylinder or crankcase while running, there's a good chance you need to install new gaskets. You can spray soapy water on the pump while it's running to inspect if there are any bubbles forming, which would indicate a leak.

Remember to tighten the bolts down to the proper torque specs as noted by the manufacturer.