| Item+ |
Description |
Part Number |
Price |
Qty |
| (0002) New tank |
Bare tank for HC2 models. Outlet is in new location. Some rerouting required. |
411-1000 |
$131.98 |
|
| (0002) New tank |
Bare tank for HC4V models. Outlet is in new location. Some rerouting required. Also order Tank Conversion Kit at bottom of page. |
411-1017 |
$207.45 |
|
| (0005) Foot pad |
Foot pad for units built after July '91. |
104-1109 |
$8.03 |
|
| (0006) Drain cock |
Can't drain your tank? Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare. |
DU25-100 |
$4.99 |
|
| (0007) Hand grip |
Keep your unit from slipping out of your hand. |
104-1072 |
$4.61 |
|
| (0008) Safety valve |
1/4" MPT safety valve rated at 165 psi |
SRV250165 |
$19.95 |
|
| (0009) Pressure gauge |
1/4" Backmounted gauge for tank only. Buy 2 for a backup. |
GA0250200BMGC |
$6.30 |
|
| (0010) Regulator & Gauge |
1/4" regulator including gauge |
360-1108 |
$27.93 |
|
| (0010a) Pressure gauge |
For regulator. Has 1/8" MPT fitting on back of gauge. |
GA0125200 |
$9.77 |
|
| (0010a) Pressure gauge for regulator |
1/8" backmounted pressure gauge for regulator. |
GA0125200 |
$9.77 |
|
| (0012) On/Off Pressure Switch |
Comes on at 90 and off at 125psi. If unloader valve on the side is leaking, order (17) instead. If your pressure switch is leaking out of the small bleeder valve on the side or if located underneath, order a tank check valve instead, your pressure switch is ok. |
FSPS90125 |
$39.95 |
|
| (0014) Power cord |
Includes 14/3 SJ power cord, 3 spaded terminals and strain relief. Don't use a cheap power cord. Use the proper one. |
AM Cord Kit |
$16.95 |
|
| (0015) Unloader valve |
This is located on the side of the pressure switch. If your valve is attached to your switch by inserting through a hole on the side bracket, then this is your style. Order this if your valve is broken. If this valve leaks continuously after it shuts off, then don't order this, order a check valve on the check valve page. It backfeeds this valve when defective giving a false sign that this needs to be replaced. |
69DCA |
$13.00 |
|
| (0015,0016)Black nylon tube kit |
1.5' of black nylon tube complete w/ ferruls, inserts and nuts for line that connects from tank to pressure switch unloader valve. |
Nylon Tube Kit 18 |
$11.57 |
|
| (0017) Check valve |
If your pressure switch leaks out the small side valve, then order this part. If your pressure switch is leaking out of the small bleeder valve on the side or if located underneath, order this valve. |
CAC3812-P1-SU3 |
$24.05 |
|
| Replacement Cold Start Valve |
If your valve will not stop leaking, replace it or oder a spare. For the 3/8" Comp x 1/2" MPT w/ cold start valve. |
SU3 |
$6.66 |
|
| Tank Conversion kit |
You will need this conversion kit if you are replacing your old Emglo HC4V tank with this new Jenny tank. Includes hardware items (click here) |
HC4VConvKit |
$62.20 |
|
