921.16475, WPB1982513 #01B063
Loading Schematic
Model Numbers: 921.16475, WPB1982513
Repair Parts for the Craftsman model 921.16475, WPB1982513 Portable Single-Stage Oil-Bath Electric Air Compressor
NOTE! This unit uses the "130" model pump.
If ordering a new 130 Pump, you can use the Head from your original pump, as it will retro-fit onto the new Pump. This is necessary for older pumps that have two outlets in the head; the new pump Head only has one outlet in the head.
Specifications
Pump specs:
- Min RPM 700
- Max RPM 1200
- Max pressure 125 psi
- Max duty cycle 50%
- Oil capacity 18 oz.
- 130 Pump 6.0 cfm @ 90psi (2 HP motor)
- 165 Pump 10.1 cfm @ 90spi (5 HP motor)
- 39 lbs.
- Torque specs (see Schematic on "Description" tab)
- For 2-4.5 HP units, you have a 130 pump
- For 5 HP and greater they call it a 165 pump. The only difference is the crankshaft and connecting rods.
- Make sure of your pump model before ordering these parts or a new pump.
- New pump comes with felt style air filter. Old canister style not available with new pumps.
- New style pump has 1/4" FPT & 1/8" FPT outlet ports in head. (Your old head may be 1/2" and will need an adapter.)
- If replacing valve plate or purchasing short block, please order the felt style filter and screen as the new style valve plate will not hold any other filter setups.
Technical Documents
- Head bolt torque 220-200 in lbs.
- Carrier bolt torque 170-230 in lbs.
- Flywheel bolt torque 150-250 in lbs.
- Bottom oil pan torque 30-50 in lbs.
- Connecting rod torque 160-200 in lbs.
Video
This short video shows the different air filter assemblies used on the Sanborn 130 pump and the Sanborn 165 pump.
Â
-
Air Compressor Pressure Gauge, 300 PSI, 1/4" MPT, Bottom-Mount #1163CC
Now: $10.95Was: $25.61Old Part Numbers: 032-00251/4" Bottom Mount, 300 PSI. Used on many makes and models. If ordering for the Craftsman model 921.16475, this is for 27 gallon vertical units.Now: $10.95Was: $25.61 -
Twist-Lock Air Filter Assembly, 1/2" MPT #0A12A2
Now: $25.95Was: $54.38Old Part Numbers: G154STwist-Lock Air Filter Assembly for air compressors. 1/2" MPT. Includes 10-SOL filter element. Replacing the pump's air filter regularly is important to maintain the performance and longevity of your air compressor. A clean filter...Now: $25.95Was: $54.38 -
Air Compressor Drain Valve 1/4" NPT #099C6E
Now: $4.95Was: $8.43Old Part Numbers: DU25-100Prevent rust from ruining your tank by draining your tank daily. Replace this Air Compressor Drain Valve 1/4" NPT if leaking or will not work. Keep an extra around for a spare. This valve is designed for bubble-tight sealing for...Now: $4.95Was: $8.43 -
Twist-Lock Air Filter Assembly, 1/2" MPT #0A12A0
Now: $29.95Was: $46.06Metal Twist-Lock Air Filter Assembly for air compressors. 1/2" MPT. Uses the #06-SOL filter element. These combination filters come with a silencer installed at the air compressor's intake and in an open, hood, and silencer tube design. The hood design...Now: $29.95Was: $46.06 -
Compression Adapter, 1/4" NPT x 3/8" OD #0E52EE
Now: $7.99Was: $9.96Old Part Numbers: 68-6-41/4" NPT x 3/8" OD compression adapter for air compressors. If your pump has an 'X' in front of the serial number and your supply tube measures 3/8" OD, order this part.Now: $7.99Was: $9.96 -
Oil Pan Gasket #058D7B
Price: $31.18If replacing crank or rings, replace this gasket. (8 bolt style)Price: $31.18 -
Price: $14.98
-
Price: $23.83
-
Air Compressor Pump with Flywheel and Filter Assembly #0E4254
Price: $315.80Complete 130 pump with flywheel and air filter. Used on units up to 4.5 HP. Important: If ordering a new 130 Pump, you can use the head from your original pump, as it will retrofit onto the new pump. This is necessary for older pumps that...Price: $315.80 -
Connecting Rod Up to 4.5hp #058D4B
Price: $37.37Connecting Rod up to 4.5HP for 130 pump. Torque 160-200 in. lbs.Price: $37.37 -
Price: $16.46
-
Air Compressor Pump Flywheel, 130/165 Pump, 12" OD #058E21
Price: $84.71Old Part Numbers: E10818512" OD Flywheel for the 130/165, 753H/755H, 040-0352, 040-0354, 040-0429, and 040-0430 model air compressor pumps.Specifications 12" OD "A" Groove Tapered bore is 1.104" to .917" RequirementsThe old pump used a 10" OD flywheel,...Price: $84.71