K7045V #01B00C
Loading Schematic
Model Numbers: K7045V
Repair Parts for the Kobalt model K7045V Stationary Single-Stage Oil-Bath Electric Air Compressor
Specifications
Unit Specs:
- 7 HP Peak/3.5 HP Running
- 12.2 SCFM @ 40 psi
- 10.8 SCFM @ 90 psi
- Max Pressure: 135psi
- 45 gallon tank
B3800 Pump Specs:
- 7.41 cfm @ 100 psi w/ 5 HP motor
- 3 - 5 HP
- Min RPM 700 Max RPM 1400
- Max Pressure 130 psi
- 13.78" for B3800
- Bore 2.36
- Stroke 1.97
- Belt A-1
- Weight 24 lbs.
- 11.02 L x 10.94 W x 12.75 H for B3000 13.00 L x 11.38 W x 13.56 H for B3800
- Bolt Footprint 7.44" Side to Side 5.62" Front to Back for B3000
- Oil capacity 1qt 12 ozs. for B3800
Extra Details
How to tell if you have a B3800 or a B2800 pump:
- B3800 Flywheel diameter is 13.78".
- B2800 Flywheel diameter is 11.02".
- NS18S pump had same parts except for head and aftercooler.
Manuals
Click here to order and download the Owner's Manual
Extras
We have your Kobalt K7045V parts here. Whether you need a pressure switch, check valve or a new pump, we have your parts. Kobalt K7045V parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Kobalt K7045V parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need and adding them to your cart. Make sure to keep spare parts on hand so that your down time will be minimal. Replace your Air Filter and Oil every 3 to 4 months if used frequently. Use straight 30W compressor oil (20W below 34 deg). Drain your tank regularly to prevent rust, especially in humid climates. This unit was made by Chicago Pneumatic.
Technical Documents
Click here for torque settings
Standard break-in procedure:
1. Open drain tap
2. Turn on compressor for about 10 to 15 min.
3. Let it cool for 15 to 20 min.
4. Close drain tap.
5. Run air compressor until unit turns off by itself.
6. Ready for use.
-
Price: $3.90
-
Oil Drain Extension Tube, B3800 #04A66F
Price: $24.89Old Part Numbers: 9053853-NUNOTE: the end of this drain tube is threaded, so the drain plug can thread into the end of it.Price: $24.89 -
Air Filter Assembly with Element #048AAA
Price: $18.50Old Part Numbers: 019-0138, 2281000, 4981000Air Filter Assembly w/ element. Protect your pump from damage. Includes element with housing.Price: $18.50 -
Piston/rod Assby. #048B36
Price: $115.99Old Part Numbers: 9428010 (ea.) For B2800 ONLY. Piston/Rings/Connecting Rod Assy.Price: $115.99 -
Piston/Connecting rod B3800-B3801 #048D6C
Price: $176.35For B3800 pump. One Piston/rod Only. Order 2 for complete set.Price: $176.35 -
Price: $132.93
-
B2800 / B3800 / NS18S Air Compressor Pump Ring Kit, ONE PISTON #048B0E
Price: $48.43Piston ring set for the B2800 / B3800 / NS18S air compressor pump. NOTE: Includes piston rings for one piston only. Order two (2) if you need rings for both pistons!Price: $48.43 -
FLYWHEEL D350 BLACK #048B26
Price: $115.83Old Part Numbers: 2236102115, 3600100, 3600181, 9428071For B3800 pump. Flywheel only. Bolt and washer sold separately. 13.78" OD. Bore - 2.36”.Price: $115.83 -
Check Valve, 1/2" FPT x 1/2" MPT, CTB1212 #022AC4
Price: $22.70Old Part Numbers: PACP434, CV4x4TA1/2" FPT x 1/2" MPT air compressor check valve with 1/8" FPT side port. If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the unit shuts off, replace this part. The check valve is a...Price: $22.70 -
B2800 Air Compressor Pump Crankcase Bottom Kit #048B38
Price: $79.50Old Part Numbers: 9428030B2800 Air Compressor Pump Crankcase Bottom Kit includes bottom oil pan and gasket.Price: $79.50