close audio
 You Are Here: Front Page » Air Compressor Parts: Belts, Filters, Regulators & More » Coleman Powermate Sanborn Air Compressor Parts » Coleman, Sanborn Pumps & Parts » Sanborn 130 Pump (040-0221), Sanborn 165 Pump (040-0222) Parts
My Shopping Cart
My Shopping Cart

Coleman Powermate Sanborn 130 & 165 Pump Parts 040-0221, 040-0222, 040-0429, 040-0430

Coleman, Sanborn Pumps & Parts


Click here for all parts
Product Details
Click here to choose your parts

Or click the schematic below to enlarge and select your parts by clicking the part reference numbers.
Coleman Powermate Sanborn
Brand: Coleman Powermate Sanborn
Model: 040-0221, 040-0222, 040-0429, 040-0430

Pump Parts

040-0221, 040-0222, 040-0429, 040-0430 - 130 & 165 Pump Parts
Description:

Click on Specs Tab above before ordering parts for this pump.
 

NOTE!

If ordering a new 130 Pump, you can use the Head from your original pump, as it will retro-fit onto the new Pump. This is necessary for older pumps that have two outlets in the head; the new pump Head only has one outlet in the head.

040-0221, 040-0222, 040-0429, 040-0430 - 130 & 165 Pump Parts schematic
Click to enlarge

Product Specifications

  • Min RPM 700
  • Max RPM 1200
  • Max pressure 125 psi
  • Max duty cycle 50%
  • Oil capacity 18 oz.
  • 130 Pump 6.0 cfm @ 90psi (2 HP motor)
  • 165 Pump 10.1 cfm @ 90spi (5 HP motor)
  • 39 lbs.
  • Torque specs (see Schematic on "Description" tab)
  • For 2-4.5HP units, you have a 130 pump
  • For 5HP and greater they call it a 165 pump. The only difference is the crankshaft and connecting rods.
  • Make sure of your pump model before ordering these parts or a new pump.
  • New pump comes with felt style air filter. Old canister style not available with new pumps.
  • New style pump has 1/4" FPT & 1/8" FPT outlet ports in head. (Your old head may be 1/2" and will need an adapter.)
  • If replacing valve plate or purchasing short block, please order the felt style filter and screen as the new style valve plate will not hold any other filter setups.
Extra Details

  • Head bolt torque 220-200 in lbs.
  • Carrier bolt torque 170-230 in lbs.
  • Flywheel bolt torque 150-250 in lbs.
  • Bottom oil pan torque 30-50 in lbs.
  • Connecting rod torque 160-200 in lbs.

 

Tech Pubs

This short video shows the different air filter assemblies used on the Sanborn 130 pump and the Sanborn 165 pump.

 

 *Please select the quantity for each item you wish to order and click the 'Add To Cart' button below.

Displaying 46 products

Reference Item Please Note! Old Part # Current Part # Price Product Image Select Qty Status
(not shown)Gasket Kit for 130/165 Pumps Includes 6,16,21a,21b gaskets for rebuild. Includes both style oil pan gaskets.046-0159$47.04046-0159 - Gasket Kit for 130/165 Pumps-
(not shown)Replacement Element for (#3) Canister 4" Diameter. Canister Air Filter Element. Element only for air filter assembly.G54E10$13.6010 - Replacement Element for (#3) Canister-
"26
00"
Air Filter Assembly (1/2" MPT) 1/2" MPT x Ht 3.80" x W 3.25" Twist LockFS-06-050$19.95FS-06-050 - Air Filter Assembly (1/2" MPT)-
"28
00"
Air Filter Assembly (1/2" MPT) 1/2" MPT x Ht 4.19" x W 4.12" Twist lockG154SFS-10-052$21.90FS-10-052 - Air Filter Assembly (1/2" MPT)-
(not shown)130 Pump  NOTE: This item is Please order item # 040-0429 (130 pump, no flywheel).  040-0221040-0221 - 130 Pump(X)-
(not shown)130 Pump (no Flywheel)Used on units up to 4.5 HP motors. Pump includes felt filter. Flywheel is not included. NOTE! If ordering a new 130 Pump, you can use the Head from your original pump, as it will retro-fit onto the new Pump. This is necessary for older pumps that have two outlets in the head; the new pump Head only has one outlet in the head.040-0429$197.00040-0429 - 130 Pump (no Flywheel)-
(not shown)165 Pump (coleman Sanborn)040-0311040-0430$196.98
$169.00
040-0430 - 165 Pump (coleman Sanborn)Due: 12/07/2016
(not shown)New 165 PumpNew Pump with felt air filter to replace original pump. Flywheel NOT included. Swap out flywheel, add oil and run.    040-0311040-0430$196.98
$169.00
040-0430 - New 165 PumpDue: 12/07/2016
(not shown)Overhaul Kit (Canister Filter)This has been superseded to the 165-0083 Felt Filter-style overhaul kit. Same kit, but includes the Felt-style Filter which must be used when installing the new Valve Plate.165-0055165-0083$126.50165-0083 - Overhaul Kit (Canister Filter)-
Reference Item Please Note! Old Part # Current Part # Price Product Image
(not shown)Overhaul Kit (Felt Filter)Overhaul kit for pump. Includes 2,6,16,21,24.165-0083$126.50165-0083 - Overhaul Kit (Felt Filter)-
00002Piston RingsIncludes rings for both pistons for the 130/165 pump. 054-0112$29.26054-0112 - Piston Rings-
00003PistonPiston for 130 & 165 pump. Includes wrist pin and two retainers.048-0065$38.78048-0065 - Piston-
00004Connecting Rod for 5 Hp And Up.Connecting Rod for 5 HP and greater for 165 pump. Torque 160-200 in. lbs.047-0092$22.11047-0092 - Connecting Rod for 5 Hp And Up.-
00004Connecting Rod Up to 4.5hpConnecting Rod up to 4.5HP for 130 pump. Torque 160-200 in. lbs.047-0091$22.11-
00005BearingFlywheel end bearing.051-0043$24.10-
00006Gasket046-0149$4.41046-0149 - Gasket-
00007Bearing Carrier with BearingBearing carrier and bearing for flywheel end.045-0053$30.97-
00009Crankshaft for 130 Pump (up to 4.5hp) Crankshaft for Sanborn 130 pump (up to 4.5HP).  Sale item - 1 in stock.  (No Returns).053-0041$55.60053-0041 - Crankshaft for 130 Pump (up to 4.5hp)-
Reference Item Please Note! Old Part # Current Part # Price Product Image
00011Flywheel 10" Flywheel. Measure your flywheel first to be sure. Replace with 12" flywheel above. Also replace belt with longer belt.044-0026044-0027(X)-
00011Flywheel12" Flywheel, "A" Groove.044-0064$39.35044-0064 - Flywheel-
00012Oil SealReplace when removing crankshaft, bearings or if leaking.046-0161$7.85-
00013Crankshaft for 165 Pump (5 Hp)Replace this also if your crank is grooved or pitted. Make sure you have the correct pump. There is a 130 and 165 pump. They both look the same on the outside.053-0043$56.36053-0043 - Crankshaft for 165 Pump (5 Hp)-
00014BearingTeflon sleeve bearing.051-0081$12.84-
00014aBearingRoller bearing. (Older pumps had obsolete bronze bushing, order short block below if damaged)051-0013$18.51051-0013 - Bearing-
00015CrankcaseFor 14 bolt pattern.049-0050$154.33-
00015Crankcase For 8 bolt pattern. , order 040-0309 or 0311 short block below.049-0043(X)-
00016Oil Pan GasketIf replacing crank or rings, replace this gasket. (14 bolt style)046-0263$12.56046-0263 - Oil Pan Gasket-
Reference Item Please Note! Old Part # Current Part # Price Product Image
00016Oil Pan GasketIf replacing crank or rings, replace this gasket. (8 bolt style)046-0150$18.65046-0150 - Oil Pan Gasket-
00017Oil Pan (14 Hole)Replace if cracked. Order gasket set also.077-0148$17.84077-0148 - Oil Pan (14 Hole)-
00017Oil Pan, (8 Hole) . Hand make a gasket from gasket material.077-0065077-0065 - Oil Pan, (8 Hole)(X)-
00019SCREW OIL PLUG061-0112$4.70-
00019
00036
Ball & Spring ValveBall and spring for older style 130/165 pumps. Fits in the block under the valve plate assembly.130/165Ball/Spring$9.34130/165Ball/Spring - Ball & Spring Valve-
00020Dipstick056-0019$11.08-
00021Valve Plate Kit Poor performance or air leaks out of the intake filter while the unit is running? This is probably the problem. Click here to view installation instructions043-0125, 043-0137043-0142$40.39043-0142 - Valve Plate Kit-
00021
00024
Valve Plate Assy with FiltersRestore compression and keep your new Valves in good shape with this convenient kit! Poor performance or does air leak out of the intake filter while the unit is running? This is probably the problem. Includes Valve Plate Assy with both Gaskets and two (2) Felt Filters.043-0142Kit$51.53043-0142Kit - Valve Plate Assy with Filters-
00021aCylinder GasketAvailable in the 130/165VPGASKETS kit only.046-0152$10.92046-0152 - Cylinder Gasket-
Reference Item Please Note! Old Part # Current Part # Price Product Image
00021a
00021b
Valve plate gaskets Includes (1) 046-0151 and (1) 046-0152 gasket.130/165VPGASKETS$28.62130/165VPGASKETS - Valve plate gaskets-
00021bHead GasketAvailable in the 130/165VPGASKETS kit only.046-0151$17.71046-0151 - Head Gasket-
00022Head KitThis kit includes: New head as well as compression adaptors for 3/8" or 1/2" supply tubes. (Order head gaskets if needed)S042-0068$41.88-
00022aAdaptorIf your pump has an 'X' in front of the serial number and your supply tube measures 3/8" OD, then order this 1/4" NPT x 3/8" Compression adaptor.68-6-4$6.4968-6-4 - Adaptor-
00022aAdaptorIf your pump has an 'X' in front of the serial number and your supply tube measures 1/2" OD, then order this 1/4" NPT x 1/2" Compression adaptor.068-0063$13.93068-0063 - Adaptor-
00023Filter ScreenFilter ScreenMetal screen for 130/165 Sanborn style pumps.S118-0023$10.77S118-0023 - Filter Screen-
00024Felt FilterFelt filter for Sanborn 130/165 style pumps. Approximately 1 1/4" x 4 1/2". Order 2 or 3 for spares. Replace this every 3-4 months if the compressor is used frequently. A clean filter allows your pump to operate at its max efficiency!019-0052$5.57019-0052 - Felt Filter-
00025Sanborn Air Filter Plate, Dual Filters Sanborn filter plate for Sanborn 130 pumps and Sanborn 165 pumps.  Metal plate fits original valve plate on your unit. Note: metal plate will not fit new style valve plate kit - must convert to felt filter style.019-0096019-0096 - Sanborn Air Filter Plate, Dual Filters(X)-
00026Replacement Filter Element for (#2) Canister3" diameter, 1 3/8" height. Replace every 3-4 months if air compressor is used frequently. A dirty filter can cause damage to the pump's valves, clog your check valve and reduce the CFM output of the compressor. Always keep an extra handy! 2 - Micron Element06$13.6006 - Replacement Filter Element for (#2) Canister-
Reference Item Please Note! Old Part # Current Part # Price Product Image
00028cAir Filter#8 hollow filter for older Sanborn pumps (old wing nut style)(ea.) 2.25" Width & 2.25" Height Protect your pump from damage by keeping clean or replacing.019-0053$36.77-

Displaying 46 products
Your question about this product has been received!
Categories
Tool Gift Ideas
Air Compressor Parts by Make
  ABAC, American IMC Air Compressor Parts
  Bostitch Air Compressor Parts
  Briggs & Stratton Air Compressor Parts
  Brute Air Compressor Parts
  Campbell Hausfeld Air Compressor Parts
  Central Pneumatic Air Compressor Parts
  Champion Air Compressor Pumps
  Chicago Pneumatic Air Compressor Parts
  Coleman Powermate Air Compressor Parts
    All Coleman, Sanborn Compressor Parts
    Coleman, Sanborn Portable Parts
    Coleman, Sanborn Stationary Parts
    Coleman, Sanborn Pumps & Parts
    NEW Powermate Compressors
    Coleman Regulators
    Coleman, Sanborn Owners Manuals
  DeVilbiss Air Compressor Parts
  DeWalt Air Compressor Parts
  Emglo Air Compressor Parts
  Fini Air Compressor Parts
  Grip Rite Air Compressor Parts
  Hitachi Air Compressor Parts
  Husky Air Compressor Parts
  Industrial Air Air Compressor Parts
  Jenny Air Compressor Parts
  John Deere Air Compressor Parts
  Kellogg Air Compressor Parts
  Kobalt Air Compressor Parts
  MasterForce Air Compressor Parts
  Maxus Air Compressor Parts
  Mi-T-M Air Compressor Parts
  Morgan Series Air Compressor Parts
  Porter Cable Air Compressor Parts
  Ridgid Air Compressor Parts
  RolAir Air Compressor Parts
  Ryobi Air Compressor Parts
  Sanborn Air Compressor Parts
  Schulz Air Compressor Parts
  Sears Craftsman Air Compressor Parts
  Senco Air Compressor Parts
  SpeedAire Air Compressor Parts
  Task Force Air Compressor Parts
  Thomas Air Compressor Parts
  U.S. General Air Compressor Parts
  Westward Air Compressor Parts
Pressure Washer Parts
Air Nailer Parts
Power Tool Parts
Air Compressor Parts
Generator Parts
Oil & Lubricants
Paint Sprayer Parts
Electric Motors and Accessories
Air Tools & Fittings
Service Repair Department
Connect with us!
Share on Facebook Share on Twitter
loading
loading